Solvent-based glue mixer for lamination
Laser anilox roll cleaning system
I-AMX MC-V Adhesive mixer for solvent lamination
Maintain viscosity in every application with our innovative mixer.
Give us your contact information and receive professional advice without obligation.
Advantages of the Anilox I-SSS-TT sleeving transport trolley
The I-AMX MC-V is a solvent-based adhesive mixing equipment designed for lamination, working with a two-component system. This equipment is distinguished by incorporating a compact mixing tank that is automatically filled with small amounts of adhesive, resulting in less than 5 kg of leftover at the end of the job. In addition, the time between mixing and application is minimal and constant, significantly improving the efficiency of the process. The mixer is equipped with an advanced viscometer that monitors the solvent ratio, ensuring that the viscosity of the mixture remains constant. This system performs automatic wash cycles that prevent the build-up of catalyzed adhesive, reusing the solvent for both washing and dilution of the adhesive. The main chassis houses the metering pumps, flowmeters and motors, all controlled by software that allows selecting the desired viscosity, operating in manual or automatic mode, and setting warning alarms. The mixed glue and solvent tanks are equipped with level sensors and supply pumps, ensuring accurate and efficient control.
Notable features include:
Benefit from all the advantages of our I-LAC machines
Give us your contact information and receive professional advice without obligation.
Up to 80% time savings when cleaning Anilox cylinders with I-Lac machines
Cleaning anilox cylinders has always been one of the biggest concerns for flexo printers. If the cylinders are not perfectly clean, their transfer capacity is reduced and therefore the color intensity of the print is lost, with the consequences for the production that this can have: invalid prints, longer start-up times, etc. I-LAC solves this problem effectively thanks to the laser that removes the dried ink from the inside of the cells without damaging the cylinder cells. A specially designed optical laser vaporizes any residue and cleans away dried ink, adhesives, waxes, silicones, etc. Laser technology allows cleaning without exerting any mechanical or thermal action on the anilox cylinder, which allows us to clean even after each use and preserve the useful life of the anilox rollers for much longer.
We have I-LAC machines with measurements from 500 mm in length to 3500 mm (cylinder without shafts), and special measurements can be adapted according to needs.
|
Model |
Maximum cleaning length (cylinder without shafts): |
Minimum cylinder diameter: |
Maximum cylinder diameter: |
|
I-LAC F60- 6 |
600 mm |
Ø55 mm |
Ø200 mm |
|
I-LAC F60 – 10 |
1000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 15 |
1500 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 20 |
2000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 25 |
2500 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 30 |
3000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 35 |
3500 mm |
Ø110 mm |
Ø300 mm |
Receive in your email the dossier with the complete technical information
