CLEANING PRODUCTS FOR FLEXO AND GRAVURE PRINTING EQUIPMENT
Thanks to its wide range of cleaning products, Recyl allows you to clean your rollers, parts, plates, inking unit whatever the type of ink or printing process. From maintenance to deep cleaning, Recyl products are very efficient and offer fast cleaning.
FOR CYLINDER
COBRA
Over the past twenty-seven years, Cobra has established itself as the most effective solution for unclogging aniloxes and restoring the full ink transfer capacity of ceramic cylinders, which would help flexo printers in the event of significant cell clogging. Cobra allows to restore the original volume of the cells and maximize the ink transfer capacity of the ceramic anilox cylinder.
GAMA CLEAN
These two products from the Clean range, marketed for over twenty years, are the “favorite” products of printers to improve the ink transfer capability of ceramic and chrome rollers. The Clean range works with all types of ink and its thixotropic properties ensure that the product does not dry on the surface or inside the anilox cells before rinsing, even with the product on the anilox for more than 48 hours.
MAGIC’LOX
Cleaning spray for ceramic and chrome cylinders, stencils and parts – for lightning fast cleaning of all types of ink at any time! MAGIC’LOX is an easy-to-use product for difficult areas – you should always have it close at hand for use! Anilox, sleeves, clichés, rubber rollers, machine parts… in short, any stained surface that needs to be cleaned quickly.
FOR PARTS
FOR CLICHÉS
ON MACHINE
FOR INKING GROUP
Laser anilox roll cleaning system
Benefit from all the advantages of our I-LAC machines
Give us your contact information and receive professional advice without obligation.
SAVING 80 % OF TIME
ALVEOLS AT 100% PERFORMANCE
ANILOX CLEANING WITH OR WITHOUT SHAFT
LASER OPTIMIZED FOR FLEXOGRAPHY
Up to 80% time savings when cleaning Anilox cylinders with I-Lac machines
Cleaning anilox cylinders has always been one of the biggest concerns for flexo printers. If the cylinders are not perfectly clean, their transfer capacity is reduced and therefore the color intensity of the print is lost, with the consequences for the production that this can have: invalid prints, longer start-up times, etc. I-LAC solves this problem effectively thanks to the laser that removes the dried ink from the inside of the cells without damaging the cylinder cells. A specially designed optical laser vaporizes any residue and cleans away dried ink, adhesives, waxes, silicones, etc. Laser technology allows cleaning without exerting any mechanical or thermal action on the anilox cylinder, which allows us to clean even after each use and preserve the useful life of the anilox rollers for much longer.
We have I-LAC machines with measurements from 500 mm in length to 3500 mm (cylinder without shafts), and special measurements can be adapted according to needs.
|
Model |
Maximum cleaning length (cylinder without shafts): |
Minimum cylinder diameter: |
Maximum cylinder diameter: |
|
I-LAC F60- 6 |
600 mm |
Ø55 mm |
Ø200 mm |
|
I-LAC F60 – 10 |
1000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 15 |
1500 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 20 |
2000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 25 |
2500 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 30 |
3000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC F60 – 35 |
3500 mm |
Ø110 mm |
Ø300 mm |
Receive in your email the dossier with the complete technical information
