Independent ink control

Laser anilox roll cleaning system

Independent ink control system I-ICS TD

Optimize your flexo and gravure production with full control of color, temperature and pH.

Give us your contact information and receive professional advice without obligation.

Advantages of the I-ICS TD stand-alone ink control system

Same tone printed on the entire job

Guarantees consistent and homogeneous quality.

Reduces color adjustment times in repetitions

Increased efficiency and less waste of time and resources.

Intuitive and very easy to use

Designed with the user in mind, for simple and efficient operation.

Adaptation to your system

Serial integration with the ink drive line

Upgradable and scalable

It complements other systems offered by Inelme to suit your needs, now or in the future.

Compatibility and customization

Compatible with any model of flexo, gravure, cardboard or special applications printer. Install all the modules or only those you need, adapting perfectly to your environment.

I-ICS TD is the ideal solution for production environments with a single flexo, gravure, laminating or coating unit. This control system is supplied in stand-alone units and is operated via an individual dialog terminal for each printing unit.

It can be configured with various options similar to those of the centralized I-ICS system. These options include color control (concentration/viscosity), temperature control, pH control, solvent mixing, filters and stirrers. In addition, the system can be customized to specific customer needs.

Receive in your email the dossier with the complete technical information

Presentation and functionality:

– For solvent-based inks: Comes in a separate cabinet containing sensors, pumps and valves. The control electronics and dialog terminal are installed in a separate cabinet.

• Para tintas base agua: El sistema se presenta en un solo gabinete con fácil acceso mediante una compuerta practicable. La electrónica de control se encuentra en la parte superior y el conjunto de sensores, bombas y válvulas en la parte inferior.

The cabinet containing the pumps, valves and sensors is strategically located between the ink tank and the printing unit. Depending on the model, the system includes an integrated ink pump that draws ink directly from the reservoir and delivers it to the printing unit.

Benefit from all the advantages of our I-LAC machines

Give us your contact information and receive professional advice without obligation.

Up to 80% time savings when cleaning Anilox cylinders with I-Lac machines

Cleaning anilox cylinders has always been one of the biggest concerns for flexo printers. If the cylinders are not perfectly clean, they reduce their transfer capacity and therefore color intensity is lost in the print, with the consequences for production that this may have: invalid prints, longer start-up times, etc.

I-LAC solves this problem effectively thanks to the laser that deeply removes the dried ink from inside the alveoli without damaging the cylinder cells. A specially designed optical laser vaporizes any residue and cleans away dried ink, adhesives, waxes, silicones, etc. Laser technology allows cleaning without exerting any mechanical or thermal action on the anilox cylinder, which allows us to clean even after each use and preserve the useful life of the anilox rollers for much longer.

We have I-LAC machines with measurements from 500 mm in length to 3500 mm (cylinder without shafts), and special measurements can be adapted according to needs.

Model

Maximum cleaning length
(shaftless cylinder):

Minimum diameter of
cylinder:

Maximum diameter of
cylinder:

I-LAC
F60- 6

600 mm

Ø55 mm

Ø200 mm

I-LAC
F60 – 10

1000 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 15

1500 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 20

2000 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 25

2500 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 30

3000 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 35

3500 mm

Ø110 mm

Ø300 mm

Receive in your email the dossier with the complete technical information

Solicita información

Solicita información

Email

inelme@inelme.com

Teléfono

(+34)96 147 10 85

Dirección

P.I. El Puig, Camino Mar, 1C
46540 El Puig de Santa María, Valencia – España

Al enviar un formulario se solicitan datos como tu correo y nombre que se almacenan en una cookie para que no tengas que volver a completarlos en próximos envíos. Al enviar un formulario debes aceptar nuestra política de privacidad.

  • Responsable de los datos: Sistemas Inelme S.L.
  • Finalidad: Responder a solicitudes del formulario
  • Legitimación: Tu consentimiento expreso
  • Destinatario: Sistemas Inelme S.L. (datos almacenados solo en cliente de email
  • Derechos: Tienes derecho al derecho al acceso, rectificación, supresión, limitación, portabilidad y olvido de sus datos

Laser anilox roll cleaning system

Benefit from all the advantages of our I-LAC machines

Give us your contact information and receive professional advice without obligation.

Up to 80% time savings when cleaning Anilox cylinders with I-Lac machines

Cleaning anilox cylinders has always been one of the biggest concerns for flexo printers. If the cylinders are not perfectly clean, they reduce their transfer capacity and therefore color intensity is lost in the print, with the consequences for production that this may have: invalid prints, longer start-up times, etc.

I-LAC solves this problem effectively thanks to the laser that deeply removes the dried ink from inside the alveoli without damaging the cylinder cells. A specially designed optical laser vaporizes any residue and cleans away dried ink, adhesives, waxes, silicones, etc. Laser technology allows cleaning without exerting any mechanical or thermal action on the anilox cylinder, which allows us to clean even after each use and preserve the useful life of the anilox rollers for much longer.

We have I-LAC machines with measurements from 500 mm in length to 3500 mm (cylinder without shafts), and special measurements can be adapted according to needs.

Model

Maximum cleaning length
(shaftless cylinder):

Minimum diameter of
cylinder:

Maximum diameter of
cylinder:

I-LAC
F60- 6

600 mm

Ø55 mm

Ø200 mm

I-LAC
F60 – 10

1000 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 15

1500 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 20

2000 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 25

2500 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 30

3000 mm

Ø110 mm

Ø300 mm

I-LAC
F60 – 35

3500 mm

Ø110 mm

Ø300 mm

Receive in your email the dossier with the complete technical information