Ink control systems
CENTRALIZED ink control
Various printing units
Our Ink Control System (I-ICS) controls the most important parameters of flexo and gravure inks. Pigment concentration, viscosity, pH and temperature are measured by means of sensors and automatically regulated, thus guaranteeing color reproduction with minimum tonal variations throughout the print run and, by memorizing the working conditions, it drastically reduces color adjustment times since it reproduces the same printed tone in the following repetitions.
INDEPENDENT INK CONTROL
Single printing unit
Para entornos de producción donde solo existe un cuerpo flexográfico, de huecograbado, de laminación o barnizado, está disponible un sistema de control I-ICS que se suministra en unidades independientes y que se controlan con un terminal de dialogo independiente para cada cuerpo impresor o unidad de impresión.
Laser anilox roll cleaning system
Benefit from all the advantages of our I-LAC machines
Tell us your contact information and receive professional advice without obligation.
Up to 80% time savings when cleaning Anilox cylinders with I-Lac machines
Cleaning anilox cylinders has always been one of the biggest concerns for flexo printers. If the cylinders are not perfectly clean, they reduce their transfer capacity and therefore color intensity is lost in the print, with the consequences for production that this may have: invalid prints, longer start-up times, etc.
I-LAC solves this problem effectively thanks to the laser that deeply removes the dried ink from inside the alveoli without damaging the cylinder cells. A specially designed optical laser vaporizes any residue and cleans away dried ink, adhesives, waxes, silicones, etc. Laser technology allows cleaning without exerting any mechanical or thermal action on the anilox cylinder, which allows us to clean even after each use and preserve the useful life of the anilox rollers for much longer.
We have I-LAC machines with measurements from 500 mm in length to 3500 mm (cylinder without shafts), and special measurements can be adapted according to needs.
|
Model |
Maximum cleaning length |
Minimum diameter of |
Maximum diameter of |
|
I-LAC |
600 mm |
Ø55 mm |
Ø200 mm |
|
I-LAC |
1000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC |
1500 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC |
2000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC |
2500 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC |
3000 mm |
Ø110 mm |
Ø300 mm |
|
I-LAC |
3500 mm |
Ø110 mm |
Ø300 mm |
Receive in your email the dossier with the complete technical information
